Biomass power generation is a method to realize recycling power generation by using renewable biomass resources, such as waste incineration power generation, agricultural and forestry waste gasification power generation, or power generation by using biogas and landfill gas. Compared with traditional power generation modes such as thermal power generation, biomass power generation can realize energy recycling, turn waste into treasure, save energy, and the power generation fuel is renewable, which is conducive to the sustainable development of China's power industry. At the same time, biomass power generation also has higher cleanliness, which is in line with China's low-carbon and environmental protection development strategy. In recent years, biomass power generation has been widely popularized and applied, which has further alleviated the problem of existing energy shortage, It can also reduce environmental pollution at the same time. It is a power generation means to achieve a win-win situation.

常用的生物質發電方法

Common biomass power generation methods

目前我國應用范圍非常廣泛的生物質發電方式是沼氣發電法，其作用原理主要是通過厭氧發酵技術對廢棄物進行發酵處理，使其生成沼氣，然后利用沼氣推動發電機穩定運行，實現發電效果。由于該方法具有較高的穩定性，所以普及力度相對來說比較大。其次還有生物質氣化發電法，該技術作用原理是將生物質置于氣化爐中，使其轉化為可燃燒氣體，經過凈化處理后投入燃氣機內作為燃料維持燃燒機運行，進而實現發電效果，也可以直接沖入燃料電池發電。氣化發電技術的要點是要保證燃氣凈化程度，由于初期氣化的燃氣會含有焦炭、灰分以及焦油等污染雜質，如果直接使用可能會讓設備老化更快，并且造成環境污染，所以在生物質氣化后要對其進行一定的精華處理才能作為燃料進行使用。

At present, the widely used biomass power generation method in China is biogas power generation method. Its principle is to ferment the waste through anaerobic fermentation technology to generate biogas, and then use biogas to promote the stable operation of the generator to achieve the effect of power generation. Due to the high stability of this method, the popularity is relatively large. Secondly, there is biomass gasification power generation method. The function principle of this technology is to place biomass in the gasifier to convert it into combustible gas. After purification, it is put into the gas engine as fuel to maintain the operation of the combustion engine, so as to realize the power generation effect. It can also be directly rushed into the fuel cell for power generation. The main point of gasification power generation technology is to ensure the degree of gas purification. Since the initial gasification of gas will contain impurities such as coke, ash and tar, if it is used directly, it will make the equipment aging faster and cause environmental pollution. Therefore, after the gasification of biomass, it must be treated with certain essence to use as fuel.

再者，生物質還可以與其他燃料混合作用發電，比如煤炭等，該技術稱為生物質混合燃燒發電法。主要的混合方法有兩種，一種是將煤炭與生物質直接混合作為燃燒介質，但是這種方法實施過程無論對燃燒設備和燃燒處理環節的要求都比較高，一些小型發電企業根本無法實現，所以應用范圍不是很廣；還有一種是將汽化后的生物質與煤炭混合作為燃燒材料，將燃燒后的蒸汽注入汽輪發電機實現發電功能，這種方法實際可操作性更高。

Moreover, biomass can also be mixed with other fuels for power generation, such as coal. This technology is called biomass mixed combustion power generation method. There are two main mixing methods. One is to directly mix coal and biomass as the combustion medium, but the implementation process of this method has high requirements for combustion equipment and combustion treatment links, which can not be realized by some small power generation enterprises, so the application scope is not very wide; The other is to mix the vaporized biomass and coal as combustion materials, and inject the burned steam into the steam turbine generator to realize the power generation function. This method has higher practical operability.

另外，直接燃燒生物質進行發電也是一種發電方法，主要是通過生物質燃燒產生的蒸汽推動蒸汽發電機實現發電。該發電技術的關鍵點在于要對生物質原材料進行提前處理，并對燃燒鍋爐采取一定的防腐措施，保證原料的適應性，同時還要對燃燒效率和蒸汽機工作效率進行實時監測管控。還有一種發展前景比較廣闊的發電技術，就是利用垃圾燃燒發電，該發電技術是在高溫狀態下實現垃圾的氣化熔融焚燒，不僅可以利用燃燒能源實現發電效果，而且對垃圾的焚燒效果比較完全，潔凈度比較高，具有很強的環保性能。

In addition, direct combustion of biomass for power generation is also a power generation method, which is mainly driven by the steam generated by biomass combustion to realize power generation. The key point of this power generation technology is to treat the biomass raw materials in advance, take certain anti-corrosion measures for the combustion boiler to ensure the adaptability of raw materials, and monitor and control the combustion efficiency and steam engine working efficiency in real time. There is also a power generation technology with broad development prospects, that is, waste combustion power generation. This power generation technology realizes the gasification, melting and incineration of waste under high temperature. It can not only use combustion energy to achieve power generation effect, but also complete waste incineration effect, high cleanliness and strong environmental protection performance.

以上就是為大家介紹的有關生物質氣發電機組的詳細介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以專業的態度,為您提供服務http://shgcmy.com

The above is the detailed introduction of biomass gas generator set. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://shgcmy.com